Skip to main content
It looks like you're using Internet Explorer 11 or older. This website works best with modern browsers such as the latest versions of Chrome, Firefox, Safari, and Edge. If you continue with this browser, you may see unexpected results.
Ask Us

LLC Locations COVID-19: Masks

FSCJ Return to Campus Plan

Face Mask/Covering Requirements are located on page 9 of the Return to Campus Plan 

 

Mask designs at FSCJ

FSCJ staff and her marvel superheroes designed Mask.

Buzz Lightyear and Sheriff Woody themed Mask.

An FSCJ professor is wearing a Mask of superheroes. 

 

undefined

FSCJ Library and Learning Commons Manager wearing a sports-themed Mask.

FSCJ 3D printed Masks

undefined

Face coverings - Variety of Designs

Materials

  • Two 10”x6” rectangles of cotton fabric
  • Two 6” pieces of elastic (or rubber bands, string, cloth strips, or hair ties)
  • Needle and thread (or bobby pin)
  • Scissors
  • Sewing machine

See Directions at: https://www.cdc.gov/coronavirus/2019-ncov/prevent-getting-sick/how-to-make-cloth-face-covering.html

undefined

 

undefined

Materials

  • Bandana, old t-shirt, or square cotton cloth (cut approximately 20”x20”)
  • Rubber bands (or hair ties)
  • Scissors (if you are cutting your own cloth)

 

 

See Directions at:  https://www.cdc.gov/coronavirus/2019-ncov/prevent-getting-sick/how-to-make-cloth-face-covering.html

 

MATERIALS:
MAIN PART OF MASK:
9” x 14“ – swath of 100% prewashed woven cotton fabric
-Fabric must have a pattern to it. 


NOSE PIECE:
4” x 3/4” twill tape
OR 4“ x 1.25” fabric

TIES:
(x2) 48”long,1/2“ soft grosgrain ribbon
OR 1/2” or 1/4“ cotton twill tape or bias tape
OR Binding made from 1”wide strips of fabric - turned into binding.

 

undefined

See Directions at:  https://www.hopkinsmedicine.org/coronavirus/_documents/INF2003076_VW_Hand-Sewn%20Mask%20instructions-1.pdf

Historic and Modern Mask Design